![]() Dry out the pump, pop the filter back in by screwing it clockwise until its tight and try the machine again. Place a towel down under the pump as there may still be some water left in. Mix together 14 c (59 mL) of water and 14 c (59 mL) of baking soda in a small bowl. Now unscrew the filter and remove any blockages and debris from the pump filter and chamber. This is known as the emergency drain procedure. ![]() If you do not have such a hose on your product then the grey drainage hose at the back of the machine can be lowered into a dish at ground level and the water will drain out by gravity. Waste pipe connected to the sink, check the sink drainage pipe work where the grey waste hose fitsĭrain the machine manually using the drain hose located at the bottom behind the pump flap. Can you see water left inside the drum? If you can then the pump filter may be blocked or the waste arrangement (if you have connected the machine to the kitchen sink) may have a blockage. You can also try a rust-dissolving spray on stubborn spots, but never. Let it sit for about 5 minutes, then wipe it off with your rag. In a spray bottle, mix a solution of 1 part water and 1 part vinegar and spray it on the rust. If your machine is stopping mid cycle, the problem may be that it is unable to drain out the water. Treating and removing rust spots will help prevent further damage to your machine and clothes.
0 Comments
Leave a Reply. |